.

.

.

.

.

.

.

.

Personal contact

 

AEG Industrial Engineering is a company for electrical plants of the industry, the energy industry and transportation. We are located at the traditional location of AEG industrial facilities, the Hohenzollerndamm in Berlin. We are in close contact with current and former AEG factories.

The main focus of our works are drive and automation systems, switchgear, transformers, generators / turbines and diesel generator sets. We also deal with general industry electronics and high and low voltage compensation systems.

Together with our representatives and our local subsidiaries, we serve our international clients. We supply spares and new equipment to our clients. We consult, design and supply for new equipment and revamp existing plants. Many of our engineers are familiar with industrial plants, ship technique and power plants supplied by AEG in the past.

We deliver devices and systems make the start up of the equipment and take care until production starts. If customers need consulting services for economizing energy in large drives for pumps and fans, we can help.

Our after sales service, inspections and repairs of AEG components like Kanis turbines, transformers, switchgear or other devices help customers to run and stabilize their production plants.

Together with our partners we can deliver complete compact steelworks including scrap sorting and the electric arc furnace EAF and LF. Where required, we can also provide rolling mills for the production of construction steel or profiles.

 
Our fields of activity:



Energy Technique T&D

  • Low voltage devices and plants
  • High and medium voltage switchgear and voltage transformation substations
  • High voltage indoor switchgear , e.g. type GIS, gas isolated up to 420 kV.
  • Compensation equipment for industries and power authorities especially for electronic installations with increased reactive power, higher harmonic currents or flicker. This applies e.g. to large drives, electric arc furnaces in the steel industry or in electrolysis plants.
  • TCR converters for dynamic control of reactive power in high voltage power grids and new digital controls for existing TCR units.
  • Substations with higher reactive power loads and critical harmonics can be controlled grid conform with our active filters.
  • Line analysis und measurements in medium voltage supply lines of equipment as above as well as feasibility studies. This can be performed independently from other electrical equipment suppliers.
  • Power distribution transformers and specific furnace transformers or reactors as well as rectifiers and transformers for steel works or electrolysis.


Power Generation

  • Generators for gas or diesel motors or turbines up to 200 MVA for decentralized or emergency power generation, turnkey in containers or prefab buildings.
  • Static excitation equipment for synchronous motors and generators
  • We quote for low cost  alternators for high-speed gas turbines with a built on planetary epicyclical gearing in IM B3 mechanical design with 5.000 rpm to 15 000rpm and 4 to 50 MVA. The maximum generator voltage without transformer is 15 kV.
  • We care for repair, maintenance and overhauling for gas turbines built by AEG Kanis and other manufacturers. Assembly works, commissioning and performance-enhancing measures are also part of our business activities. Test runs can be performed at the factory of AEG Kanis.
  • Converters and inverters for the control of motors or alternators, turbines and pumps of hydro power plants
  • Static uninterruptible power supplies (UPS) up to 1000 kVA with battery charging management and rotating CPS (Conditioned Power Supply) units up to 2000kVA.
  • Converter to generate other frequencies than 50Hz, i.e. 60Hz or 16 2/3Hz.
  • Programmable controls for electric generators with AEG TRANSINAUT


Industry Electronics

  • Static exciter systems for sychronous alternators / generators in power plants.
  • Start up converters for steam and gas turbine units and large hydro aggregates.
  • High voltage inverters / converters for energy control in hydro power plants or for launching turbines .
  • High current equipment POWERSEMI for power supplies for electrolysis and DC arc furnaces.
  • High voltage rectifiers for electrostatic precipitators in flue gas cleaning
  • Thyristor converter AEG Thyro for control of heating units and steel stirrer units.
  • Coils for electro-magnetic steel stirrers with converters for the steel industry
  • High current equipment and power supplies for electrolysis and arc furnaces
  • Resistors, high voltage contactors and other components for traction and crane equipment.


Drive Technology 


Transport

Railway Technology

  • Resistors, heating devices, switches, mono and multipolar DC contactors, high voltage AC/DC contactors
  • Battery charging devices for trains and other components for rolling stock and fixed installations.
  • Railroad power supply 16 2/3 hz or 50 Hz or DC for local and long distance travel

Ships

  • Main drives, shaft generators, diesel generator sets and other components for ships


Automation

  • Memory programmable PLC automation units as the well-proven A020-A500 and the new @120-@250
  • Dynamic drive controls with AEG Logidyn D and A800
  • Control and monitoring devices with the AEG TRANSINAUT for power generation systems
  • Devices for process control, communication systems and telecontrol engineering (SCADA) with telecontrol substations Micro, @40, @50 and @60
  • Support for existing older installations like MODICON, GEAMATICS and GEATRANS